FRACTURING TOOLS
T1017 T-Nemec
T1017 T-NEMEC
The T1017 T-NEMEC Frac Sleeve is designed for selectively stimulating multiple zones in either open or cased hole applications. The T1017 T-NEMEC Frac Sleeve can be used in either vertical or horizontal wells usually in conjunction with the Launch-HS-Frac Sleeve and Vector-Pack and Vector Anchor Packers.
T1019 Launch
T1019 LAUNCH
The Target LAUNCH is a Frac Initiation Sleeve designed for the Toe area of horizontal wells. The high pressure rating gives the operator the ability to test the casing annulus, then increase pressure to hydraulically open the LAUNCH. The tool can then be the first stage of the frac job through the large ports. The pressure setting to open the tool is adjustable by the use of Burst Disc. A backup shear system is incorporated into the tool to prevent early opening.
This Patent Applied For tool is able to be used in conjunction with VectorSet Frac Packers, PAK-MAN Frac Plugs, T-NEMEC Frac Ports, Circulation Sub as well as common Floating Equipment. Many different combinations of these are able to be used in conjunction with the LAUNCH.
Using Dual Burst Disc, the tool provides a backup to insure opening at the desired pressure. Special Port Covers insure that the ports are not filled with cement or other debris that could prevent the piston from opening. When the tool is activated, these covers are removed.
T278 Vector
T278 VECTOR
The T278 Vector Packer is designed to be run in multiple stages. It can be run in either open or cased hole multiple zone applications and in either vertical or horizontal wells. The VECTOR is hydraulically set with an internal locking mechanism providing a positive and reliable long term set.
T662 HULK
T662 HULK
The Target T662 H.U.L.K. Big Bore Frac Plug is a big bore wireline set bridge plug for use with a dissolvable plug that can be left in a well bore without the need for drill out before production begins. Should the H.U.L.K. need to be removed, the tool is completely drillable for quick removal due to the compact size.
The patent applied for Wireline Adapter Kit (WLAK) setting equipment is unique in that the plug is completely held by the WLAK in a way to prevent preset. The plug is only able to stroke when the Pressure Setting Tool (PST) is activated. H.U.L.K. is designed for each specific casing sie and weight with the ID as large as possible while maintaining the required pressure rating. This allows for a close tolerance to the casing size for better pump-down effect with much less fluid loss then with conventional or composite style plugs.
T1400 DEMON
T1400 DEMON
introducing the Demon Plug, a small, full open ID frac plug that provides a unique twist to traditional frac plugs. With the right well conditions, this plug will simply disappear during flowback, eliminating the need to drill them out. Frac, flowback, and put it on production.
Watch Video: https://www.youtube.com/watch?v=qnOT37H3L1w
